Find Products for Your Vehicle
HIGH PERFORMANCE 4-STROKE PISTON KITS BY CP PISTONS
MSRP: $4.95 - $329.95
- Each part has been thoroughly developed and incorporates the latest in cutting edge technology that everyone from the top professional riders to your weekend warrior demands
- Moose Racing pistons feature x-style forgings and fully boxed-style (race pistons) forgings for ultimate strength, minimizing friction, durability, power, and weight reduction
- Full radius dome designs maximize quench while eliminating hot spots that promote detonation
- Internal bracing maximizes durability while decreasing friction in the pin assembly
HIGH PERFORMANCE 2-STROKE PISTON KITS BY CP PISTONS
MSRP: $4.95 - $199.95
- Forged from 4032-T6 aluminum for ultimate strength, durability, and performance
- Engineered for maximum weight reduction that enables a faster and more consistent throttle response
- Newly designed and tested skirt profiles provide extra durability and noise reduction while delivering maximum power
- Along with the latest skirt profiles, newly designed rings put less tension on the cylinder wall without compromising ring seal
CAST PISTON KITS
MSRP: $1.95 - $186.95
- Gravity cast aluminum alloy with 18% silicon to increase resistance to wear and decrease thermal distortion, thus providing a longer piston life
- Coated skirts ease break-in, decreasing wear, and aiding in lubrication
- Wear resistant piston rings that are either nitride or chrome plated
- Wrist pins are nitride coated providing a hardened wear resistant bearing surface
INTAKE AND EXHAUST VALVE KITS
MSRP: $179.95 - $269.95
- Each kit includes stainless steel valves, high-rev valve springs, lightweight retainers, and Viton® valve seals
- Stainless steel valves are made from a one-piece forging featuring 21-4N material
- Valves are heat-treated and feature a nitride process on the surface, which improves valve wear and overall performance
- High-Rev Springs are coiled with a proprietary high-quality wire that undergoes a heat treating and stress-relieving process, which dramatically increases the spring's life-cycle and improves valve stability at high RPMs
REPLACEMENT CYLINDERS
MSRP: $199.95 - $289.95
- Replace your damaged or worn OEM cylinder
- Made from cast aluminum, nickel silicon carbide plated
- Precision machined and honed to OE stock bore sizes
- Extremely durable low friction bore surface allows for greater heat dissipation
HIGH PERFORMANCE CONNECTING RODS
MSRP: $249.95
- Moose Racing has teamed up with CP-Carrillo to bring you the highest quality, professional connecting rod
- 100% machined from oversized forging insures proper grain flow and consistency through the manufacturing process
- Made from proprietary material containing specific amounts of chrome, nickel, moly and vanadium, for ultimate strength and durability
- Engineered to be lighter and stronger than stock rod
VALVE SHIM KITS
MSRP: $59.95 - $89.95
- Complete valve shim kits make it easier to maintain your valve train
- Forged from 4140 cold rolled steel, not sintered
- Laser etched size on each shim for identification
- 7.48mm diameter shim kits include 3 shims of each size from 1.20mm to 3.50mm in 0.05mm increments, fitting all Japanese 250F’s
VALVE SHIM REFILL PACKS
MSRP: $1.95
- Forged from 4140 cold rolled steel, not sintered
- Laser etched size on each shim for identification
- 7.48mm diameter shim kits include 3 shims of each size from 1.20mm to 3.50mm in 0.05mm increments, fitting all Japanese 250F’s
- 8.90mm shim kit include 3 shims of each size from 1.72mm to 2.60mm in 0.04mm increments, fitting newer KTM 250’s and 450’s
POWER COMMANDER V
MSRP: $379.95 - $448.95
- Reduced size from PCIII USB (less than half the size of PCIII)
- USB powered from computer (9V adapter is no longer needed for programming)
- Two-position map-switching function built in (map switch not included)
- Gear/speed input (allows for map adjustment based on gear and speed)
POWER COMMANDER III USB
MSRP: $369.95
- USB (Universal Serial Bus) port provides an instant and automatic connection to the Power Commander Control Center software; simply power up the unit and connect the PCIII USB to the computer with the supplied cable
- Provides precise information for fine-tuning a fuel-injected motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications
- Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock; Dynojet continuously maps new calibrations for each bike for downloading at their web site (www.powercommander.com)
- If you do not have a computer, you can change the settings with three touch buttons on the faceplate
RADIATOR HOSE/CLAMP KITS
MSRP: $72.95 - $326.95
- Manufactured by Samco® Sport UK - the world leader in silicone hose, with over 20 years experience
- Hand wrapped and 100% visually inspected in the UK
- European grade high-temperature silicone guaranteed to 356°F
- Smooth flow and improved insulation promotes radiator efficiency and improves engine cooling
STOCK REPLACEMENT RADIATOR CAPS
MSRP: $18.95 - $19.95
- Old and faulty radiator caps can cause steam and fluid to be pumped out of the radiator overflow hose
- A replacement cap is the least expensive and easiest way to solve or troubleshoot your liquid-cooled bike/ATV radiator problems
- Available in chrome and black finish
- Color-coded seals: Yellow = 1.1 bar (16psi); Black = 1.1 bar (16psi)
HIGH PRESSURE RADIATOR CAP
MSRP: $19.95 - $20.95
- Upgrading to a high-pressure 1.6 BAR, 1.8 BAR, or 2.1 BARfrom the stock radiator cap is the simplest and least expensive way to avoid over-boiling your engine
- Raising your cooling system's maximum operating pressure increases your coolant's boiling point, allowing you to ride harder and longer
- Chrome finished cap
- Color-coded seals: Red = 1.6 bar (23psi); Green = 1.8 bar (26psi); Blue = 2.1 bar (30psi)
STAINLESS STEEL OIL FILTERS
MSRP: $27.95
- High-performance oil filters that outperform paper filters
- Constructed out of high-quality micronic filter cloth and stainless steel for maximum durability and performance
- Filter down to 35 microns consistently and still allow great flow
- High flow rate that stays consistent at extreme temperatures
OIL FILTERS
MSRP: $5.95 - $6.95
- High-quality replacement for your standard filter
- Can filter down to 10 microns
- Constructed with high-quality paper filter materials
- Manufactured with sealing ring to ensure perfect fit
GASKETS AND OIL SEALS
MSRP: $3.95 - $164.95
- Moose can now handle all your gasket and seal needs at a fraction of OEM cost
- High-tech materials provide unmatched reliability and performance
- Rebuild the engine and transmission with total confidence as each set is designed for durability and accurate fit
- Oil seals are genuine OEM replacement seals
MAGNETIC OIL FILTER COVERS BY ZIPTY
MSRP: $69.95 - $106.95
- Add more than a factory look to your 4-stroke
- Sturdy CNC'd billet oil filter cover
- Ultra powerful rare earth magnet catches damaging particles your filter misses
- Developed for and used by Zip-Ty Racing
MAGNETIC FLOAT BOWL DRAIN NUT FOR KEIHIN
MSRP: $22.95
- From open carb vents and dusty fill-ups, many particles enter your fuel supply
- The rare earth magnet in this drain plug catches more debris than you would think
- Fits most Keihin carburetors for 2- and 4-strokes - plug size M18x1.0
- Red anodized billet aluminum construction with pressed-in magnet
MAGNETIC DRAIN PLUGS - BY ZIPTY
MSRP: $22.95
- Made from 7075 lightweight aluminum
- Prolong engine life by pulling metal filings out of the oil
- Ultra-powerful magnets
- Come with either O-ring or washer sealing surface
MAGNETIC DRAIN PLUGS
MSRP: $11.95
- Prolong engine life and save on costly repairs with an oil plug that picks up metal filings
- Must use washer provided
- Compare with original OEM plug before installing
- Made in the USA